更新 2026年10月
Automatic Pool Cover Parts
There is no fixed order in which automatic pool cover parts fail. Name the symptom, then the part the manual tells you to inspect. That keeps a track problem from being ordered as a motor. This hub maps the assembly so repair and replacement conversations use the same words.
Identify the part before you order
Copy this row into your own notes. Leave a cell blank when you do not have the document. Do not mix a rope, glider, or track from another brand unless that manufacturer's configuration lists the pair.
横向滑动以对照每一列。
| Part name | Nameplate model | Track profile | Document |
|---|---|---|---|
| Fabric | Order form for this model | ||
| Webbing or rope | Parts list that names the end fitting | ||
| Glider | Track series the glider is listed with | ||
| Leading edge | Manual page for that bar | ||
| Drive or power pack | Label photo and manual section |
Parts map
Names differ by brand. Use the parts list for this model. A shared word is not proof the parts interchange.
| Part | What it does | What you might see |
|---|---|---|
| Fabric | Spans the water | Cracks, tears, or chemical burn |
| Webbing and ropes | Carry load and pull | Fray, stretch, or snap |
| Leading edge | Stiff front bar | Bent or no longer square |
| Tracks and gliders | Guide travel | Binding, jump-out, missing slugs |
| Drive | Motor or hydraulic pack | No motion after power and tracks check out |
| Control | Key switch or station | Dead switch with live feed |
Fabric replacement
Fabric is a measured part. Order from current pool dimensions, not from a ten-year-old invoice, unless a technician has confirmed the shell has not moved. Replacement is installer work when ropes are under tension.
What to photograph before you order
Photograph both tracks, both ends, the leading edge, webbing at the corners, the control, and the motor or pack label. A single pretty pool photo is not a parts ticket.
The parts diagram is the naming sheet. Fabric replacement is a measured job. Rope and motor pages say when those SKUs are the wrong first buy.
Usual replacement order
Fabric and webbing age in the sun. Ropes stretch. Gliders wear. Tracks last if they stay clean and fastened. The drive is last if travel was true and power was dry. Buying the last item first is how people pay twice.
| Part | Typical cue | Measure from |
|---|---|---|
| Fabric | Cracks, thin spots, chemical burn | Current waterline, not the old invoice |
| Webbing / ropes | Fray, stretch, snap | Travel path and attachment points |
| Gliders | Jump-out, chatter | Track profile in hand |
| Drive | No motion after path and power check out | Label on the motor or pack |
What to read with this page
Use the parent hub for the product family, then stay inside this cluster for the decision you still have open. The related cards below are the three pages that usually settle the next question without sending you back to a generic search.
If travel is already unsafe, leave the guide and open repair. If you are still planning a system, work through the planning checklist and bring the answers to the people who will measure and install it.
常见问题
- Can I mix brands of fabric and tracks?
- Only when a technician confirms the glider, webbing, and track profile match. Mixed parts are a common source of jump-out.
- Is a fabric replacement a full new system?
- No. It is a layer. Tracks, housing, and drive can stay if they still run true. A tech should confirm that before you pay for cloth only.
- Can I change fabric color without a remeasure?
- Color is a finish. Size is a measure. If the shell has moved or coping was replaced, measure again even if you want the same color.
上级栏目： Repair