更新 2026-08-25
Automatic Pool Cover Fabric Replacement
Fabric replacement is a measured part, not a tarp swap. Cracks, chemical burn, and tears that reach a load path are the usual cues. Order from current pool dimensions. Installation is technician work when ropes are under tension. This page is the replacement job brief, not a how-to pull the old sheet.
When fabric is the part
Surface chalk, brittle folds, and chemical bleaching mean the sheet is tired. A small puncture away from the edge can sometimes be patched by a technician. A tear along webbing or a leading-edge pocket is a replacement conversation. Do not sew household fabric onto a safety-cover claim.
Measure before you order
Use finished waterline length and width, including the out-of-square pair. A ten-year-old invoice is a hint, not a cut list, unless a technician has confirmed the shell has not moved.
| Input | Why it matters | Fail if |
|---|---|---|
| Current length pair | Sheet and track travel | One side is guessed |
| Current width pair | Roller and leading edge | Housing end was never measured |
| Track profile | Glider and webbing match | Brand is mixed on a guess |
| Color and material | Owner finish choice | Safety claim is assumed from color |
What not to do
Do not cut the old fabric off while ropes are loaded. Do not walk the new sheet across a dirty track. Do not claim the new fabric is a certified safety cover unless the installed system matches a tested configuration. See the ASTM page.
What to read with this page
Use the parent hub for the product family, then stay inside this cluster for the decision you still have open. The related cards below are the three pages that usually settle the next question without sending you back to a generic search.
If travel is already unsafe, leave the guide and open repair. If you need a preliminary system read, use request system advice with photos of both ends and both long sides.
Measure the pool you have now
Order from current waterline and a confirmed square check, not from the invoice in the garage. Coping replacements and freeze movement change the number. Fabric work still involves tensioned ropes, so it stays installer scope.
常见问题
- Can I keep the old tracks and only change fabric?
- Often yes if the glider and webbing profile still match. A technician should confirm before you buy the sheet.
- How long does fabric last?
- Chemistry, sun, and standing water move the number more than a brand slogan. There is no honest single-year promise on this page.
- Can I keep the old leading edge?
- If it is still square and the new fabric is built for it. A bent bar under new cloth recreates the old travel problem.
上级栏目： Parts